TeamSwift
http://www.teamswift.net/

PARCEL SHELF PIVOTS/RUBBERS
http://www.teamswift.net/viewtopic.php?f=12&t=61283
Page 1 of 1

Author:  almcphee [ Fri Feb 05, 2016 12:07 am ]
Post subject:  PARCEL SHELF PIVOTS/RUBBERS

The parcel shelf sits and pivots on two pins that I believe are supposed to have a rubber sleeve covering them .
Any idea where to get these ,or can someone post a pic of one , so I can fab something suitable ?
Thanks!
Al

Author:  suzukitom [ Fri Feb 05, 2016 1:19 pm ]
Post subject:  Re: PARCEL SHELF PIVOTS/RUBBERS

EDIT: Posted pictures below..

1989-1994: Pivot shaft snaps into spring clip mounted in side brackets. No rubber.
Image

1995-2001: Pivot shaft snaps into cavities moulded into side brackets. No clips or rubber.
Image

Author:  almcphee [ Fri Feb 05, 2016 8:53 pm ]
Post subject:  Re: PARCEL SHELF PIVOTS/RUBBERS

Thanks so much for the quick reply!
Now....just gotta find some clips.....
Cheers!
Al

Author:  nzswift [ Sat Feb 06, 2016 1:16 pm ]
Post subject:  Re: PARCEL SHELF PIVOTS/RUBBERS

Are you looking for the male or female parts? The male parts are available from the dealer.

Author:  almcphee [ Sat Feb 06, 2016 2:45 pm ]
Post subject:  Re: PARCEL SHELF PIVOTS/RUBBERS

Looking for the retaining clips that would be the female portion................
Thanks for commenting !
I'll be making a small list of other bits I need shortly, since I just picked up a nice '91
Al

Author:  almcphee [ Sat Feb 06, 2016 2:46 pm ]
Post subject:  Re: PARCEL SHELF PIVOTS/RUBBERS

Making a list of bushings.....Whiteline......from Oz ??

Author:  nzswift [ Sun Feb 07, 2016 4:52 am ]
Post subject:  Re: PARCEL SHELF PIVOTS/RUBBERS

When mine were stuffed it was the male bits that broke and they just slid new ones in. The problem is that they used some horror epoxy self help fix I had to remove first.
I'll try to ring the dealer tomorrow and see if the female bits are available...

Author:  almcphee [ Mon Feb 08, 2016 8:23 pm ]
Post subject:  Re: PARCEL SHELF PIVOTS/RUBBERS

I believe the clips I need are Pt# 87435-82000
Again, thanks for inquiring!
Al

Author:  SUZUKI ROCKS [ Sun Feb 14, 2016 5:03 am ]
Post subject:  Re: PARCEL SHELF PIVOTS/RUBBERS

For bushings check out superflex.co.uk

Great range for our cars.

Author:  tannee [ Tue Mar 01, 2016 4:14 am ]
Post subject:  Re: PARCEL SHELF PIVOTS/RUBBERS

I also need to find this parts. Thanks for information ! :) :) :)
โป๊กเกอร์คาสิโนบาคาร่า

Author:  nzswift [ Wed Mar 02, 2016 3:52 am ]
Post subject:  Re: PARCEL SHELF PIVOTS/RUBBERS

Both the male and female parts are available here ex Japan.... Your part no for the female part was correct.
Looks like less than $US 10.00 each including me shipping them to the US. They'll be here in about two weeks

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/