TeamSwift
http://www.teamswift.net/

BD Motorsports MK1/2/3/4/5 polyurethane bushes
http://www.teamswift.net/viewtopic.php?f=17&t=33985
Page 2 of 3

Author:  gamefoo21 [ Mon Oct 22, 2007 1:19 pm ]
Post subject: 

hotboy183 wrote:
I would be in for a kit at the right price. ie the same setup as on ur swift. 8)


Thirded!

But with a set cost for just the rears for us unlucky folks with the odd body north american edition.

I believe though the Sway bar bushings are the same. I need to replace mine as the rubber it is cracking.

Author:  shcmikel [ Wed Oct 31, 2007 11:13 pm ]
Post subject: 

4th'd

Author:  Hertz [ Fri Nov 02, 2007 4:21 am ]
Post subject: 

Well enough interest has been created for me to make something up, gotten a few emails as well. BUT I know there is a big difference between people voicing there support for something and and actually paying for it! So these kits, will be made to order only, out of my existing stock. Watch this space for more details.

Author:  Swiftjersey [ Sun Nov 04, 2007 12:43 am ]
Post subject: 

G10 wrote:
hotboy183 wrote:
I would be in for a kit at the right price. ie the same setup as on ur swift. 8)


2nd that. :P

count me third .......if it fits us 96 swift :lol: i mean 5th'd
....

paypal is ready for the right price.....

Author:  Hertz [ Sun Nov 04, 2007 8:36 pm ]
Post subject: 

Kits have been assembled, refer to first post for details. Now buy up :D

Author:  Swiftjersey [ Sun Nov 04, 2007 9:27 pm ]
Post subject: 

Hertz wrote:
Kits have been assembled, refer to first post for details. Now buy up :D


sorry for being lazy......but honestly, i dont know much about car eg. my chassis number... it's a 1996 US suzuki swift 1.3 3sp? automatic trans, vin num starts at 2.

im pretty sure it's gonna help out on handling aspect of the car even if it's not lowered or doenst have a stiffer springs/struts on. help me out and i'll buy a set from you....thanks a lot...

Author:  gamefoo21 [ Sun Nov 04, 2007 10:02 pm ]
Post subject: 

Swiftjersey wrote:
Hertz wrote:
Kits have been assembled, refer to first post for details. Now buy up :D


sorry for being lazy......but honestly, i dont know much about car eg. my chassis number... it's a 1996 US suzuki swift 1.3 3sp? automatic trans, vin num starts at 2.

im pretty sure it's gonna help out on handling aspect of the car even if it's not lowered or doenst have a stiffer springs/struts on. help me out and i'll buy a set from you....thanks a lot...


The MK4 we have is very different from the swifts he got there.

As far as I know, the bushings will all work, except the offset ones for the front. IIRC

Author:  LittleMSG [ Mon Nov 05, 2007 1:06 am ]
Post subject: 

All the bushings work from the MK2/3 on the North American MK4/5 even the front offset caster bushings. Only bushing from MK2/3 I had a problem with was for the rear sway bar mounts to the body.

Nothing has to be modified for the complete upgrade. Just press old out and new ones in.


To answer the part about the large stud for the front control arms inner bushing:
MK2/3 and MK4/5 stud diameter is the same, but the MK2/3 tapers down at the nut making it seem like it is a smaller diameter. But it's the same. Thats why woodie had to drill the lower brace holes bigger to fit.

I have all the poly MK2/3 bushing on my North American MK4. Even the offset front caster bushings.

Author:  Woodie [ Mon Nov 05, 2007 7:39 am ]
Post subject: 

That makes sense, thanks, it was keeping me up at night.

Author:  Hertz [ Mon Nov 05, 2007 5:27 pm ]
Post subject: 

Thanks for clearing that up LittleMSG, first post edited.

Author:  Swiftjersey [ Tue Nov 06, 2007 9:36 pm ]
Post subject: 

Hertz wrote:
Thanks for clearing that up LittleMSG, first post edited.


how much is the total shipped to 07002 NJ, usa?
is there any more special on group buys just in case we pulled 10 orders from this thread? thanks.....

c'mmon guys, let's get some at least 10 sets of orders. ....what ya think?

Author:  Hertz [ Wed Nov 07, 2007 1:05 am ]
Post subject: 

Haha if you manage to get 10 people to buy up in a single group buy Swiftjersey, I'll give you a full set free. I'm only offering this because I know it won't happen :lol: After being a participant in many group buys over a 5 year period, 90% have fallen through, and the ones that have gone through are only involving 2 or 3 people, but please prove me wrong!!!!

Swiftjersey wrote:
how much is the total shipped to 07002 NJ, usa?


Air Mail - $63 AUS
Sea Mail - $45 AUS

Author:  Swiftjersey [ Wed Nov 07, 2007 1:38 pm ]
Post subject: 

We have at least 5 people on this thread whose interested, so c'mmon people, lets go for it 5 more then we have at least 12.5 % off the retail price.

i think more people will be coming in if you give us a BETTER deal. Spread the word people! This is a nice mod coparable with bigger sway bars which costs double (i think)

May the teamswift force be with us!

Author:  Hertz [ Wed Nov 07, 2007 6:03 pm ]
Post subject: 

Oh if ten people buy in one group buy, I can defiantly improve the price. But the difference between people making a suggestion they are interested, and people actually forking over the money are two very different things. I know it sounds a little morbid, but that's just been realistic.

Author:  Swiftjersey [ Wed Nov 07, 2007 9:49 pm ]
Post subject: 

Hertz wrote:
Oh if ten people buy in one group buy, I can defiantly improve the price. But the difference between people making a suggestion they are interested, and people actually forking over the money are two very different things. I know it sounds a little morbid, but that's just been realistic.


don't be too negative hertz,,, we never know.... i set up a group buy thread for your bushing kit on group discount section.....i'll keep it open for ten days...if none replies i'll definitely order a set from you. just one more thing.......it really fits on a 96 suzuki swift, right? pardon my redundancy.... :?

and thanks for consideration.....

Author:  Hertz [ Wed Nov 07, 2007 10:36 pm ]
Post subject: 

You are a young member grasshopper, you have much to learn /end asian voice. My youthful enthusiasm to push group buys died many years ago :lol: I'm happy to sell in batches of one, but wish you the best to get some members together.

Yes they will fit your swift.

Author:  Lihtan [ Thu Nov 08, 2007 2:45 am ]
Post subject: 

How much for just the control arm bushings?

Author:  Hertz [ Thu Nov 08, 2007 6:34 pm ]
Post subject: 

Lihtan wrote:
How much for just the control arm bushings?


View the first page, I make a post half way down indicating all the individual prices.

Author:  Swiftjersey [ Tue Nov 13, 2007 9:54 pm ]
Post subject: 

Hertz wrote:
Lihtan wrote:
How much for just the control arm bushings?


View the first page, I make a post half way down indicating all the individual prices.



a succesfull group buy is possible, if you only push through it. why not give your details as a "supplier" in the group discount section under "group buy on poly urethane bushings." it wont hurt if you're gonna try it.

Author:  Hertz [ Sun Nov 18, 2007 6:34 pm ]
Post subject: 

I made a decision a few months ago not to overly push my products on any Suzuki forums. As well as being as being a supplier, I'm a Suzuki enthusiast first on the forums, and a supplier second. I'm just going to do the occasional small deals for forum members, and let my website run on it's own merit without becoming a leach on the forums.

Author:  metro freak [ Thu Jul 24, 2008 4:38 pm ]
Post subject:  Re: BD Motorsports MK1/2/3/4/5 polyurethane bushes

And for those of us who are not in AUS, here is a currency converter link for you. http://finance.yahoo.com/currency This should also help all the dial up users too.

Author:  m [ Thu Jul 24, 2008 4:49 pm ]
Post subject:  Re: BD Motorsports MK1/2/3/4/5 polyurethane bushes

There is also a currency converter on the BD Motorsports website.

Author:  Hertz [ Sun Jul 27, 2008 8:40 pm ]
Post subject:  Re: BD Motorsports MK1/2/3/4/5 polyurethane bushes

Totally forgot about this thread! Prices have eventually been increased due to external price increases beyond my control.

Author:  hugete [ Fri Aug 08, 2008 6:58 pm ]
Post subject:  Re: BD Motorsports MK1/2/3/4/5 polyurethane bushes

Hi,

I want to buy such material in conjunction with exhaust 4-2-1. You know how many days it takes to get the material to Spain? And as payment?

Forgive but as I write I speak Portuguese and Spanish and I am using a translator ; D

:|

Author:  hugete [ Tue Aug 12, 2008 6:05 pm ]
Post subject:  Re: BD Motorsports MK1/2/3/4/5 polyurethane bushes

up

Page 2 of 3 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/