TeamSwift
http://www.teamswift.net/

polished/non polished SS valves, G13/G10
http://www.teamswift.net/viewtopic.php?f=17&t=43104
Page 1 of 2

Author:  suprf1y [ Thu Apr 16, 2009 8:20 pm ]
Post subject:  polished/non polished SS valves, G13/G10

Tease

Just got this stuff in, and took pics a few mins ago

Swift GT .5mm oversize swirl polished SS (these things are like jewelry)
Image
Image

Author:  l4mbch0ps [ Thu Apr 16, 2009 10:31 pm ]
Post subject:  Re: polished/non polished SS valves, G13/G10

*drool*

Man those are gorgeous!

I've always been curious about your performance head rebuild prices, but never been at a serious enough point to actually msg you and find out! Looking forward to pricing info...

Author:  geofarace [ Fri Apr 17, 2009 7:24 am ]
Post subject:  Re: polished/non polished SS valves, G13/G10

Yea man those look great..I would like a set for the 1.0???

Author:  suprf1y [ Fri Apr 17, 2009 9:40 am ]
Post subject:  Re: polished/non polished SS valves, G13/G10

G13 (Swift GT)
SS non polished
Set of 16 valves $160
Exhaust only $100

.5mm oversize swirl polished SS
Sold as sets only
16 pcs $240

G10
SS non polished (both int/exh valves are SS)
Set of 6 valves $60
Exhaust only $30

G10 swirl polished SS .5 mm oversize
Set of 6 valves $90
Exhaust only $45

G10 rebuild kit
Includes 6 SS valves, 6 bronze manganese guides, and 6 viton seals.
$99
Swirl polished O/S valves add $30

G13 rebuild kit
Includes 16 SS valves 8 guides (usually only exhaust side needs replacing), and 16 viton seals.
$220
Oversize polished SS valves add $65

Author:  gamefoo21 [ Fri Apr 17, 2009 10:25 am ]
Post subject:  Re: polished/non polished SS valves, G13/G10

PFFT!

Need some valves for the 16V SOHC engines :-P

The G10 set looks nice... very nice... Hmm...

Author:  geofarace [ Fri Apr 17, 2009 10:27 am ]
Post subject:  Re: polished/non polished SS valves, G13/G10

So what kind of difference would there be between the swirl polished and non???

Author:  suprf1y [ Fri Apr 17, 2009 10:36 am ]
Post subject:  Re: polished/non polished SS valves, G13/G10

$80 :lol:

I can't really put a number on it, but if I were building a serious performance motor, and I could go oversized, SS, and polished, for that price, I'd do it.
I'm not kidding when I say those G13 valves look like jewelry.

Author:  92GT [ Sat Apr 18, 2009 9:52 pm ]
Post subject:  Re: polished/non polished SS valves, G13/G10

How much for a set of oversized and seals only for GT? Or just for the seals.

Author:  suprf1y [ Sun Apr 19, 2009 7:54 am ]
Post subject:  Re: polished/non polished SS valves, G13/G10

The seals are $1.50 ea
Buy a set of those valves, I'll throw the seals in for $10

Author:  Mr.Pipe [ Sun Apr 19, 2009 10:12 pm ]
Post subject:  Re: polished/non polished SS valves, G13/G10

And how much for the bronze guides for the DOHC Superfly?

Darcy

Author:  suprf1y [ Sat Aug 08, 2009 12:02 am ]
Post subject:  Re: polished/non polished SS valves, G13/G10

A new addition. I'll take some better pics later.
Custom made 3tech G10 .5 mm (they actually measure about .6) oversize, 1 pc swirl polished SS valves, with undercut stems.



$15 each.

Mr.Pipe wrote:
And how much for the bronze guides for the DOHC Superfly?

Darcy


$5 ea

Author:  turbo2475 [ Sat Aug 08, 2009 2:02 am ]
Post subject:  Re: polished/non polished SS valves, G13/G10

OMG those are beautiful!!!!!!

Author:  gamefoo21 [ Sat Aug 08, 2009 11:12 am ]
Post subject:  Re: polished/non polished SS valves, G13/G10

I looked it up, seems the valve guides from the G10 are the same as the G13BB/G13S 16V SOHC.

So if anyone needs to replace thiers, these should work. Unless Suprfly says differently. =)

Author:  suprf1y [ Sat Aug 08, 2009 12:31 pm ]
Post subject:  Re: polished/non polished SS valves, G13/G10

Let me look into that.
You can't always trust the listings.
Also working on valves for the 16V SOHC motors.

Author:  turbohull [ Sun Aug 09, 2009 7:15 pm ]
Post subject:  Re: polished/non polished SS valves, G13/G10

I can check it up in the EPC tomorrow morning, they could very well be the same...

Author:  turbohull [ Wed Aug 12, 2009 11:30 am ]
Post subject:  Re: polished/non polished SS valves, G13/G10

they are indeed the same, mk2+ 3 cylinders and all 16V sohc. (from all models)

the only one i'm not sure is the 1.6 16V in swifts, they list a different number and it is not valid. could be a typo (60811 against 60B11)

Author:  gamefoo21 [ Wed Aug 12, 2009 12:24 pm ]
Post subject:  Re: polished/non polished SS valves, G13/G10

Hmm... Since the head on the G16 16V SOHC is the same as the G13 16V SOHC, it's probably a typo.

Author:  suprf1y [ Tue Apr 27, 2010 7:49 pm ]
Post subject:  Re: polished/non polished SS valves, G13/G10

A few pics of the G10 swirl polished valves in .5 mm oversize.
Note the undercut stems for increased flow.
Image
Image
Image

Author:  Knuckles [ Wed Apr 28, 2010 9:09 am ]
Post subject:  Re: polished/non polished SS valves, G13/G10

Very nice Mike.
Undercut stems size what is the dia compared to stock?

Author:  suprf1y [ Wed Apr 28, 2010 7:48 pm ]
Post subject:  Re: polished/non polished SS valves, G13/G10

I'll measure them next time I'm in the shop (and remember)

These are for the G13 DOHC
Image
Image

Author:  djaggs [ Sun Oct 31, 2010 4:09 pm ]
Post subject:  Re: polished/non polished SS valves, G13/G10

You got oversized intake and ex valves for the 1.3 GTI ?

Is .5mm the biggest/best upgrade in size for the head?? What about 1mm oversize?

Author:  suprf1y [ Sun Oct 31, 2010 4:15 pm ]
Post subject:  Re: polished/non polished SS valves, G13/G10

I have .5 mm swirl polished, 1 pc SS valves for the G13 DOHC.

Author:  Harry-Irish-swift [ Wed Nov 03, 2010 7:28 pm ]
Post subject:  Re: polished/non polished SS valves, G13/G10

What difference does the .5 mm make and what is better about swirl polished valves than the others??

Author:  suprf1y [ Wed Nov 03, 2010 9:03 pm ]
Post subject:  Re: polished/non polished SS valves, G13/G10

More flow, on both accounts.

I can't tell you how much but it's more.

The .5 mm is also good if you've had the head rebuilt, and seats ground before. It prevents valve retention, which.... improves flow :P

Author:  Harry-Irish-swift [ Thu Nov 04, 2010 2:31 am ]
Post subject:  Re: polished/non polished SS valves, G13/G10

Will those valve sit into a standard valve seat or will the seats have to be ground to a larger angle?

Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/