TeamSwift
http://www.teamswift.net/

1988 pontiac firefly- ISO stabilizer bar bushings
http://www.teamswift.net/viewtopic.php?f=31&t=61805
Page 1 of 1

Author:  blueturbofly [ Wed Jul 13, 2016 9:54 am ]
Post subject:  1988 pontiac firefly- ISO stabilizer bar bushings

finding it to be a challenge finding some (all) parts for the front suspension on this car.
rockauto lists a few parts, but trying to find parts locally- :roll:
most part #s are good, but no stock :x
looking for the front stabilizer bushings- have not been able to find any listings for them.
anyone find decent alternatives?
one good note-ordered new hatch supports from gm- $30 each
will modify a honda :oops: blower motor resistor to fix the inop resistor in the heater box
there must be parts from another make/model to fit.

Author:  blueturbofly [ Thu Jul 21, 2016 2:39 pm ]
Post subject:  Re: 1988 pontiac firefly- ISO stabilizer bar bushings

are parts really that hard to find? :oops:

Author:  suzukitom [ Thu Jul 21, 2016 3:47 pm ]
Post subject:  Re: 1988 pontiac firefly- ISO stabilizer bar bushings

Have you tried alibaba?

Not sure but the Suzuki Alto suspension may be similar to the MK1.. and it was in production longer in other parts of the world.

Author:  blueturbofly [ Thu Jul 21, 2016 7:21 pm ]
Post subject:  Re: 1988 pontiac firefly- ISO stabilizer bar bushings

my next route was to pull the old bushings out, and try to find a comparable size.

thanks, I completely forgot about the Suzuki alto..... :oops:

I will be in Victoria next week, wont have the time (or the need) to look for parts.

a week off work, spent at my buddies cabin and/or on his boat 8)

Author:  blueturbofly [ Thu Jul 21, 2016 7:25 pm ]
Post subject:  Re: 1988 pontiac firefly- ISO stabilizer bar bushings

just looked on e-bay under Suzuki alto- I MAY HAVE FOUND WHAT I NEED!!! and available from whiteline as well!

thanks suzukitom for refreshing my memory!

Author:  suzukitom [ Fri Jul 22, 2016 2:47 pm ]
Post subject:  Re: 1988 pontiac firefly- ISO stabilizer bar bushings

Glad to help :-D

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/