TeamSwift

Home of the Suzuki mini-compacts ! Your Home for all things Suzuki Swift, Geo Metro, Holden Barina, Chevy Sprint, Pontiac Firefly, and Suzuki Cultus. TeamSwift is a technical performance oriented community!
It is currently Sun Nov 19, 2017 5:08 pm

Underbody braces, turbos and more!

All times are UTC - 5 hours




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Wed Feb 22, 2017 1:00 pm 
Offline

Joined: Mon Jul 09, 2012 11:32 am
Posts: 150
Location: Pennsylvania
Shocks and springs?

While there could have been special sway bars, the torsion beam rear axle would be a substantial variation and I'm guessing same as base model.

Thanks
Tom


Top
 Profile  
 
PostPosted: Wed Feb 22, 2017 5:15 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sun Feb 23, 2003 4:16 am
Posts: 8042
Location: Ontario, Canada
The front sway bars were different

_________________
Contact 3tech: g10pro@rocketmail.com


Top
 Profile  
 
PostPosted: Thu Feb 23, 2017 12:43 am 
Offline
User avatar

Joined: Tue Feb 13, 2007 10:28 pm
Posts: 1175
Location: So Cal, USA
I believe USA '85-86 had different rear end set up.

Yes, front sway bars are thicker, as well as the strut rod bushings ID not interchangeable with N/A versions.
The rest is pretty much the same.
Several versions of spring rate available, aftermarket mainly in AU and Europe for 1.3 GT,
as well in USA for AC equipped cars (additional weight). Custom spring set is best bet but
runs $100 per spring, send a sample in, front and rear and request % change to your spec.
http://www.teamswift.net/viewtopic.php?f=10&t=47687&p=356619#p356619
Whiteline makes a solid bushing for rear arms last I checked, picked up a set last year.
Poly bushings available for front mount sway bar bushings easily available online,
just measure swaybar OD and Google or Ebay it. Be sure to get a stout housing bracket,
as I've had the aftermarket ones crack and break, most likely to find Energy components
through Jegs, Summit or other online sellers, shop around for best price.
Custom solid panhard rod, adjustable will run you buck, buck fifty or so from any good
custom manufacturer, lighter materials will cost more, plus bushings.
There's been many coil over conversions posted here, pillow ball mount, etc.
sky's the limit....get creative. Tire/rim combos are huge upgrades for suspension as
well, but don't get stupid. This is now, right fabricator, cash, you get whatever you want.
Just do the research and be specific, and well... the trial and error. Ugh


Top
 Profile  
 
PostPosted: Sun Mar 19, 2017 12:06 am 
Offline
Island Inbreeder
User avatar

Joined: Tue Oct 18, 2005 6:56 pm
Posts: 6347
Location: Emerald city Washington
front wheel bearing are different


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group