TeamSwift

Home of the Suzuki mini-compacts ! Your Home for all things Suzuki Swift, Geo Metro, Holden Barina, Chevy Sprint, Pontiac Firefly, and Suzuki Cultus. TeamSwift is a technical performance oriented community!
It is currently Fri Oct 20, 2017 8:51 pm

Underbody braces, turbos and more!

All times are UTC - 5 hours




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Parts Catalog
PostPosted: Mon Sep 07, 2015 1:35 pm 
Offline

Joined: Sat Mar 29, 2008 10:37 am
Posts: 139
Location: Boring, Oregon
Anyone have in their possession a Suzuki/Chev(circa 1987-88) parts catalog for our MK I?
Specifically looking for the diagram of the transmission with references to the name of
the part and the part number. Just would like a copy of the page(s) so I can research the parts needed to rebuild 1st gear.
Any information and/or guidance would be appreciated.
Thanks
db


Top
 Profile  
 
 Post subject: Re: Parts Catalog
PostPosted: Mon Sep 07, 2015 7:29 pm 
Offline
Island Inbreeder
User avatar

Joined: Tue Oct 18, 2005 6:56 pm
Posts: 6347
Location: Emerald city Washington
deebee wrote:
Anyone have in their possession a Suzuki/Chev(circa 1987-88) parts catalog for our MK I?
Specifically looking for the diagram of the transmission with references to the name of
the part and the part number. Just would like a copy of the page(s) so I can research the parts needed to rebuild 1st gear.
Any information and/or guidance would be appreciated.
Thanks
db

.
Phil did A solid back in the day here is his How to R&R a G10 Transaxle
.
viewtopic.php?f=9&t=42589
.
95-3banger Did one
.
http://teamswift.net/viewtopic.php?f=9&t=50486
.
and I will add this is the shizznizle for $58
.
http://www.ebay.com/itm/Geo-Metro-Swift ... a2&vxp=mtr
.
.

_________________
.

t3 ragtop wrote:
the 3 banger isn't at all a "grenade." it's a tough little son of a bitch doing a big job. respect it.
suprf1y wrote:
I didn't save anything.Vehicles are to me, like little boys are to Tommy.Toys to be abused for my own personal pleasure.
jrjd wrote:
"Driving a Swift GTi is like driving a bike in your house".


Top
 Profile  
 
 Post subject: Re: Parts Catalog
PostPosted: Mon Sep 07, 2015 10:20 pm 
Offline
User avatar

Joined: Wed Nov 08, 2006 8:40 am
Posts: 873
Location: End of days ranch Bouse az
i have an 1985 shop manual

_________________
it doesent have to be surrounded by water to be a island and dont forget it's a 3cyl Blow,Suck,Bang


Top
 Profile  
 
 Post subject: Re: Parts Catalog
PostPosted: Mon Sep 14, 2015 7:07 pm 
Offline

Joined: Sat Mar 29, 2008 10:37 am
Posts: 139
Location: Boring, Oregon
Need to know the parts needed and the part numbers for the 1st gear repair
Here are some part names I got from a Haynes manual, but I need the Suzuki/Chevrolet #'s
Any thing I missed or can delete in this list for 1st gear repair? Thanks
Low speed sleeve and hub
countershaft 1st gear
1st and 2nd gear bearing
1st gear synchro ring
2nd gear synchro ring
low speed synchro ring
sliders?
shims?
Confused, but not giving up
Doug


Top
 Profile  
 
 Post subject: Re: Parts Catalog
PostPosted: Fri Sep 18, 2015 12:17 am 
Offline
User avatar

Joined: Tue Feb 13, 2007 10:28 pm
Posts: 1170
Location: So Cal, USA
This is the diagram you need...

Attachment:
transparts.jpg
transparts.jpg [ 691.62 KIB | Viewed 832 times ]


(I pm'd you the big file with the numbers included, anybody else
can contact me for the info.)

Best of luck finding any of the actual parts as much if not all of the
part numbers have been superceded. Though it's a big planet and I'm sure
there's some old stock somewhere or aftermarket stuff available.
May take a bit of digging, but if you're persistent enough it may pay off.

Quote:
Phil did A solid back in the day here is his How to R&R a G10 Transaxle
.
viewtopic.php?f=9&t=42589
.
95-3banger Did one
.
http://teamswift.net/viewtopic.php?f=9&t=50486
.
and I will add this is the shizznizle for $58
.
http://www.ebay.com/itm/Geo-Metro-Swift ... a2&vxp=mtr
.


JVS always comes through. :D Phils write up was a good reference for my first rebuild
in tandem with the FSM, as always there's a learning curve on doing it the first time.
And I forgot about 95-3 banger's..got to bookmark that one.

Here's my take..
http://www.teamswift.net/viewtopic.php?f=32&t=47916&start=125

And note the comment to run the tranny on jackstands(95-3banger post) to get the oil flowing,
with the LSD I had major noise with all those gears when I spun the tire by hand.
Thought for sure I lost a needle bearing loose in the case or some other assembly
catastrophy, but after spinning the wheels by hand, a lot, I mean a lot, the noise
majically disappeared once the fluid was distributed.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group