TeamSwift
http://www.teamswift.net/

rhb32 oil feed / return replacement
http://www.teamswift.net/viewtopic.php?f=32&t=62992
Page 1 of 1

Author:  Pascal [ Tue Sep 05, 2017 7:28 pm ]
Post subject:  rhb32 oil feed / return replacement

so my oil feed snap

Image

instead of using another one from the old turbo which I'm worry it will happen like this again, have anyone try one of these?

Image
http://shopping.kinugawaturbo.com/turbooilfeedlineandreturnpipeihirhb3rhb31rhb32.aspx

Image
http://www.ebay.com/itm/Turbo-Oil-Feed-Line-Return-Pipe-IHI-RHB3-RHB31-RHB32-/382188142338?epid=1245534086&hash=item58fc303f02:m:mwUvt634Cl8duiP4lCuuq2g&vxp=mtr

Image
http://www.ebay.com/itm/MAMBA-Turbo-Oil-Feed-Line-Kit-For-IHI-RHB3-RHB31-RHB32-Hitachi-HT05-HT06-/262895277830?hash=item3d35c79706:g:CJUAAOSw7GRZL-gr&vxp=mtr

Author:  92convert [ Wed Sep 06, 2017 6:01 pm ]
Post subject:  Re: rhb32 oil return line replacement

Hi Pascal
Yes i replaced the original oil feed line with the Mamba one and it worked perfectly but instead of the oil line by the pump I relocated the line next to the oil pressure switch, the reason is at least the oil is filtered before going to the turbo. I know that the engineer designed like that for a reason but I don't drive hard so it's still working perfectly for me :D
Cheers.

Author:  Pascal [ Fri Sep 08, 2017 8:29 am ]
Post subject:  Re: rhb32 oil feed / return replacement

thanks for the reply, I'll try source some banjo and hose locally first, if nothing then I'll get the MANBA kit

Author:  Rustyoid [ Fri Sep 08, 2017 5:19 pm ]
Post subject:  Re: rhb32 oil feed / return replacement

Mine snapped just like yours and I simply clamped on high heat/pressure rubber hose and its help up fine even on a modified engine/larger turbo

Stainless lines look nice but really not necessary

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/