TeamSwift

Home of the Suzuki mini-compacts ! Your Home for all things Suzuki Swift, Geo Metro, Holden Barina, Chevy Sprint, Pontiac Firefly, and Suzuki Cultus. TeamSwift is a technical performance oriented community!
It is currently Sat Oct 21, 2017 12:26 am

Underbody braces, turbos and more!

All times are UTC - 5 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Wed Jun 12, 2013 11:11 pm 
Offline

Joined: Wed Nov 16, 2005 2:03 am
Posts: 13
Location: Abbotsford
I have 3 cars total, 1 Daily Driver and 2 parts cars.

Daily Driver - white 1987 Suzuki forsa, it has a stock motor, koni front shocks w/modified strut, rancho 5000 adjustable rear shocks and civic springs with adjusters, i have a set of mint condition MK2 Suzuki GTI 14" 7 spoke alloy wheels to go with the car but they need rubber, currently on the car are 13" 7 spoke antera wheels with center caps and very good generic rubber(80%), the CTS mod has been done, manual boost controller and turbo timer installed, procar racing seats installed, Autometer Carbon Fiber boost(20psi) and air/fuel gauges, the clutch has been hit and miss as i was told when i bought the car that the input shaft seal on the transmission is leaking and that is why the clutch would slip but it only does it on the hwy in 5th around 130-140km/h and sometimes 2nd depending on how aggressive you shift from what i have noticed, i have a brand new centerforce dual friction clutch to be installed. I have been running between 12-14psi and have had no overheating issues or head gasket issues at all. This car was also gov't inspected in BC in the last year or so as it was registered in AB.


Parts Car 1 - 1987 red/black Suzuki Forsa Turbo - this car has all the goodies however is twisted and undriveable and has no hood, front lights, grill, or fenders but its movable - 3 good and 1 not so good MK2 Suzuki GTI 14" 7 spoke alloy wheels need new rubber, custom rear sway bar setup, rear rancho 5000 adjustable shocks, civic springs with height adjusters, 13" Honda prelude brake calipers and master/booster, Japanese(i was told) 5-speed transmission with 40k on it - solid, engine w/10k on it balanced and bored .030 over, head was ported with chevy 350 valve springs and a stage two cam from colt cams in aldergrove, arp studs, two stock intercoolers welded together, custom intercooler piping, fully programmable SDS EM4 system with ignition adv/ret dial in the cockpit and LCD programmer for adjusting parameters on the fly, Apexi electronic boost controller, and Apexi turbo timer, Autometer Pro-Comp series boost(30psi), air/fuel, water, oil pressure gauges and a Greddy pyrometer, custom silver face gauge cluster, all of the wiring in this car was done and when it was crashed it was running 22 psi and it passed air care, the motor/transmission is currently pulled and the roll cage has been cut in an attempt to pull the dash to maintain the wiring harness.

Parts Car 2 - 1987 Suzuki forsa turbo red - no pic, there is no engine/transmission installed in the car and the front fenders, hood, and grill/lights are missing it is sitting on 13" steelies with BFG R1 rubber on them but it has been sitting a while so im unsure how good the rubber would be, inside the car i have stock seats, dash, 3 heads, a distributor and other misc parts.

I have been messing with these cars for way too long and would like to see this project go to someone who is looking to build a nice, clean, fast mk1 as a daily driver.

Im asking $2300 obo for everything i have listed, i really want to sell everything at once complete and i wanted to post on here first as i know these cars are becoming harder and harder to find parts for and this is a solid setup once its built.

Attachment:
forsa1.jpg

Attachment:
forsa2.jpg

Attachment:
forsa3.jpg

Attachment:
forsa4.jpg


You do not have the required permissions to view the files attached to this post.

_________________
"It's not WHAT you drive, It's HOW you drive!"


Top
 Profile  
 
PostPosted: Mon Jun 17, 2013 8:26 am 
Offline

Joined: Wed Nov 16, 2005 2:03 am
Posts: 13
Location: Abbotsford
Ok, am I asking too much?? Or is nobody really interested??

_________________
"It's not WHAT you drive, It's HOW you drive!"


Top
 Profile  
 
PostPosted: Mon Jul 22, 2013 11:19 pm 
Offline

Joined: Wed Nov 16, 2005 2:03 am
Posts: 13
Location: Abbotsford
alright i know i said i wanted to sell everything as a whole but i just sold the daily driver,

all other parts from the parts cars - EVERYTHING is up for sale, i can pull parts and ship, you pay shipping

i will accept PAYPAL only if you want parts shipped, otherwise if you are close to abbotsford BC we can figure something out

i have a couple of messages im going to answer and i will post a list of what has been sold

ALL PARTS OBO - make an offer, be reasonable and i will probably take it

_________________
"It's not WHAT you drive, It's HOW you drive!"


Top
 Profile  
 
PostPosted: Tue Jul 23, 2013 5:06 pm 
Offline

Joined: Wed Apr 03, 2013 8:40 am
Posts: 42
Location: tamaqua,pa.
can you sell me the four wheels and aero side stips under doors from red car. could you give me a price shipped to 17982 in Pennsylvania? thanks george


Top
 Profile  
 
PostPosted: Fri Jul 26, 2013 11:47 am 
Offline

Joined: Sun Jun 09, 2013 12:55 pm
Posts: 7
Location: ecuador
hello
I'm interested in buying some parts of chevy sprint turbo / suzuki swift mk1 87/88, please let me know if you still have something.


Top
 Profile  
 
PostPosted: Wed Mar 12, 2014 5:30 pm 
Offline

Joined: Mon Mar 10, 2014 7:18 pm
Posts: 11
Location: bc
Anything still available!?!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group