Wanted: mod cam for 16v SOHC
Page 1 of 1

Author:  WE0H [ Mon May 12, 2003 5:12 pm ]
Post subject:  Wanted: mod cam for 16v SOHC

I need a hot cam for my 16v SOHC 1.3 head. Does anyone know where I can buy one??? I prefer duration over 240 at .050.<br><br>Thanks,<br>Mike <p></p><i></i>

Author:  falconeater [ Mon May 12, 2003 5:21 pm ]
Post subject:  Re: Wanted: mod cam for 16v SOHC

try <!--EZCODE AUTOLINK START--><a href=""></a><!--EZCODE AUTOLINK END--><br><br>yes it is!!!<br><br>they have cams for most suzuki 4 cyls <!--EZCODE EMOTICON START :D --><img src= ALT=":D"><!--EZCODE EMOTICON END--> <p></p><i></i>

Author:  Guest [ Mon May 12, 2003 5:38 pm ]
Post subject:  Cam

<!--EZCODE LINK START--><a href="" target="top"> </a><!--EZCODE LINK END--> <br><br>they have them <p></p><i></i>

Author:  WE0H [ Mon May 12, 2003 8:42 pm ]
Post subject:  Re: Cam

I emailed Glen at Rocky-Road and he replied that he doesn't have a cam or gear for a SOHC G13B. He did refer me to Rotational Dynamics on a gear. The Suzi-Sport site didn't show anything apparent but I will email them and see what they say. I might end up going with a Colt cam but would need a good stocker to ship them as I want to keep my original cam if the car goes bye bye someday.<br><br>Thanks for the tips. The search continues...<br><br>Mike<br><!--EZCODE EMOTICON START :( --><img src= ALT=":("><!--EZCODE EMOTICON END--> <p></p><i></i>

Author:  MetroPower [ Mon May 12, 2003 10:48 pm ]
Post subject:  Re: Cam

Maybe isky can grind you a custom cam. I don't think its too expensive. A friend of mine whom works at a machine shop says they do custom grinds for him all the time. If you can have one made I would be really interested in one also. <p></p><i></i>

Author:  WE0H [ Tue May 13, 2003 5:24 pm ]
Post subject:  Re: Cam

I will email them tonight and see what they think.<br>Thanks,<br>Mike <p></p><i></i>

Author:  suprf1y [ Tue May 13, 2003 5:49 pm ]
Post subject:  Re: Cam

I'm still waiting for a reply from Colt cams.If you're looking for a core,I believe the 1.6 16v cam is the same,so you could use one of those.I've had a bunch of stuff ground by a few guys in Toronto.I'll look through my papers and see if they have any suitable grinds. <p></p><i></i>

Author:  Murr [ Tue May 13, 2003 5:59 pm ]
Post subject:  Re: Cam

hey mike<br><br>email me if want some info on grinds, my grinder has profiles for 8v and 16v ohc 1.3 and 1.6.<br><br>pricing is great expecially if your from the states. <p>MURR<br>Racing... Because other sports require only 1 ball</p><i></i>

Author:  MetroPower [ Wed May 14, 2003 12:57 am ]
Post subject:  Re: Cam

Are these cams you guys talking about regrinds or new cams. I would rather pay the extra for a new if thats at all possible. <p></p><i></i>

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group