TeamSwift
http://www.teamswift.net/

g13bb injector info
http://www.teamswift.net/viewtopic.php?f=5&t=61893
Page 1 of 1

Author:  Bad Goat [ Sun Aug 21, 2016 10:54 pm ]
Post subject:  g13bb injector info

I'm looking for information on injectors in the G13bb. In particular the size, width, and depth of the injector bung. measurements of the distance between injectors would be help, and pictures never hurt.

I'm looking at fuel injecting a G13A with megasquirt, and i'm hoping to use parts for the G13bb. I know it's probably not the most effienct way to get fuel injection in a samurai, but its a project for fun. Thanks in advance.

Author:  suprf1y [ Mon Aug 22, 2016 7:36 am ]
Post subject:  Re: g13bb injector info

I would recommend using parts from a 98-01 swift/metro with the 16V SOHC. The DOHC injectors not very good, and the SOHC parts will be cheaper and easier to get

Author:  Bad Goat [ Mon Aug 22, 2016 9:15 am ]
Post subject:  Re: g13bb injector info

suprf1y wrote:
I would recommend using parts from a 98-01 swift/metro with the 16V SOHC. The DOHC injectors not very good, and the SOHC parts will be cheaper and easier to get


That was my thought. Plus, I think the 40mm throttle body and injectors would more closely sized to this engines HP.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/