TeamSwift
http://www.teamswift.net/

Ready to take the plunge (Nitrous)
http://www.teamswift.net/viewtopic.php?f=6&t=61762
Page 1 of 1

Author:  SuzukiMan365 [ Wed Jun 22, 2016 1:56 pm ]
Post subject:  Ready to take the plunge (Nitrous)

Hi all! My swift gti is constantly picked on by the hondas in my neighborhood. I have a few basic mods on it: cone filter, 60mm tb, TomsII chip, lighter underdrive double pulley, Cultus headers, De-catted 2 inch press bent exhaust pipes, cannon muffler. I want to run a 35 shot (wet) of nitrous. My goal is to run a 15.0 - 15.5 quarter mile time. Can i do this with my current setup? (i want to keep using the chip). What times should i be getting with a 35hp shot? Those with nitrous experience please share your knowledge. I have already searched past posts, just need some more info. Thanks in advance!

Author:  pocket_rocketxxx [ Thu Jun 23, 2016 11:53 am ]
Post subject:  Re: Ready to take the plunge (Nitrous)

My best time with 50hp dry in my 4 doors hatch g13b dohc its 14sec flat/ 100mph.
195/60r14 falken azenis rt615k
With stock tb
Stock intake
Stock fuel rail and injector
Big cam 8.50 lift
Header
2 inch exhaust line with no cat

Author:  SuzukiMan365 [ Fri Jun 24, 2016 6:24 pm ]
Post subject:  Re: Ready to take the plunge (Nitrous)

Thanks for your input. Do you use the stock chip?

Author:  pocket_rocketxxx [ Mon Jun 27, 2016 5:55 am ]
Post subject:  Re: Ready to take the plunge (Nitrous)

No its not the stock ecu ..8500tr/min

Author:  SuzukiMan365 [ Tue Aug 02, 2016 8:46 am ]
Post subject:  Re: Ready to take the plunge (Nitrous)

Any other nitrous users out there? Can I retard timing at the distributor, run the Tom's II chip and 35 HP wet shot and be safe and reliable?

Author:  pocket_rocketxxx [ Mon Aug 08, 2016 9:34 am ]
Post subject:  Re: Ready to take the plunge (Nitrous)

You dont need touch the timming with only 35hp .. only fire up at minimum 4000rpm.. its -2° for 50hp ... you can retard 1deg but ......

Author:  SuzukiMan365 [ Mon Aug 29, 2016 5:10 pm ]
Post subject:  Re: Ready to take the plunge (Nitrous)

Update. I put back in the stock chip. Nitrous installation complete. 35hp on demand. Taking it to the drag strip soon.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/