TeamSwift
http://www.teamswift.net/

G13B Copper Head Gasket
http://www.teamswift.net/viewtopic.php?f=8&t=49591
Page 1 of 1

Author:  WestCoastZuk [ Fri Nov 19, 2010 8:29 pm ]
Post subject:  G13B Copper Head Gasket

Hello,

This is my 1st post here...I found this forum from this website -

http://www.occracing.com/

They claim to sell a copper head gasket for the Samurai as listed on this page -

http://www.occracing.com/pricing.htm

CGAS-100 Copper head gasket (sizes available)
0.032", 0.043", 0.050", 0.062", 0.080", or 0.090" PRICED EACH $125.00

Does anyone have any pros/cons to running a copper head gasket?

I'm in the process of rebuilding my g13 and was thinking about using a copper head gasket...

Anyone with any info would be much appreciated!!

Thanks!! :mrgreen:

Author:  ROV [ Wed Nov 24, 2010 3:56 pm ]
Post subject:  Re: G13B Copper Head Gasket

it's a reusable gasket that wont be blown easely with high compression.
I would use one if the price would be right.

Author:  Mr Murf 59 [ Tue Dec 21, 2010 6:29 am ]
Post subject:  Re: G13B Copper Head Gasket

I tried them on my hi compression G10 engine. It kept blowning right away. I have used them on HiComp V8s. And they worked great. But the torque specs on the G10 are 55 ft/lbs. I also tried several different techniques to install them. Still no good. I got mine from Innovative Machine in St. Louis. Mo About the same price

Author:  swiftmotorsport [ Sat Oct 15, 2011 12:12 pm ]
Post subject:  Re: G13B Copper Head Gasket

With a copper headgasket you have to Wills Ring the head and block, so when the copper is compressed it fills the two small grooves (1 head, 1 block) on each cylinder.
Have you thought of using genuine Suzuki items as they are multi layer steel (such as Cometic etc), I'm running 12.1:1 compression on a 77mm bore (1362cc), I used a genuine Vitara MLS headgasket held down with ARP studs and nuts and have had no problems with it at all.

Author:  Zaahr [ Tue Apr 24, 2012 3:59 pm ]
Post subject:  Re: G13B Copper Head Gasket

I run copper gaskets ...The only thing I need to use is a hi temp sealant like coppercoat or graphite grease and that`s all.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/