TeamSwift
http://www.teamswift.net/

itbs
http://www.teamswift.net/viewtopic.php?f=8&t=51980
Page 2 of 2

Author:  dominator [ Mon Apr 16, 2012 12:50 pm ]
Post subject:  Re: itbs

found some cheap 2nd hand 315cc injectors, fits like a glove :wink:
http://www.flickr.com/photos/11473969@N ... hotostream
diferent nozels so i guess different spray pattern
http://www.flickr.com/photos/11473969@N ... hotostream

gary

Author:  miniswift [ Sat Aug 11, 2012 4:26 pm ]
Post subject:  Re: itbs

Hey Gary,

Have you finished this setup now?
I will mod my CAD data for this setup if you would like so that you can make a batch of it.

Cheers
Atchi

Author:  dominator [ Sun Aug 12, 2012 5:00 am ]
Post subject:  Re: itbs

well iv done the itb themselves, just got to paint it all, I had to abandon the air plenum coz of the mastercyl so im just going to use socks on the vstacks and design some sort of cold air feed around it
But, the whole project is on hold now, I did have the cash for the ecu and mapping sesh but then the cr dog box came up for sale, I did start saving up again but now my mrs is expecting my 1st kid, so all swift funds are now baby funds, for now :wink:

Author:  miniswift [ Sun Aug 12, 2012 1:35 pm ]
Post subject:  Re: itbs

Hehe... sounds familier.
I had 3 now so I feel you, man. Congrats, by the way.

We shall se how it goes!

Cheers
Atchi

Author:  instant_shine [ Thu Nov 01, 2012 9:50 pm ]
Post subject:  Re: itbs

Just wanted to add to this thread another swift gti itb setup. Also good info there.

http://www.redlinegti.com/forum/viewtop ... =7&t=48795

Author:  dominator [ Fri Nov 02, 2012 3:08 am ]
Post subject:  Re: itbs

Not a bad thread, I had the same idea to use striders flange but he wasnt selling them seperate at the time so I looked into another route

Author:  strider [ Fri Nov 02, 2012 4:15 am ]
Post subject:  Re: itbs

dominator wrote:
Not a bad thread, I had the same idea to use striders flange but he wasnt selling them seperate at the time so I looked into another route


Im confuse :huh:

Author:  dominator [ Fri Nov 02, 2012 6:08 am ]
Post subject:  Re: itbs

This was a while ago when you started selling the custom intake manifold, I asked you how much just for the flange but you said they wer'nt being sold seperately, by the time they were, I was commited to my setup as i had already started buying parts for it

Iv got to say though, anyone looking to do an itb setup using a proper flange, striders is the one to go for

Author:  dominator [ Mon Jan 07, 2013 5:29 am ]
Post subject:  Re: itbs

Just a little update, iv come into a little money latley so this conv is most definetly back on!!! :D

Author:  Teeth [ Mon Jan 07, 2013 9:11 pm ]
Post subject:  Re: itbs

Well, I certainly sympathize with the Swift vs. baby funding issue :roll:

I am right there with you--my first is spending a lot of time in his swing watching me tinker in the garage.

You seem to be doing all of the things I would do if I was just a little more willing to spring for international shipping and less stubborn about fabricating things myself when I can. I am particularly jealous of your hotbits setup and your header, which are what I really want vs. what I did instead. (cut springs, phonis and Calmini). I would do ITBS too if I didn't need to learn so much about tuning and get a stand alone to do it. How much do you think you have gained vs. the SR20 and oversize MAF setup?

Anyway, good work :thumbsup: I thought I would reply so I will continue to notice these updates.

Author:  Teeth [ Mon Jan 07, 2013 11:58 pm ]
Post subject:  Re: itbs

Actually, the latest header picture is gorgeous. That does not look like the Pacesetter you had--what, pray tell is that and where can I get one? Or did you have it custom made?

Author:  dominator [ Tue Jan 08, 2013 2:30 pm ]
Post subject:  Re: itbs

Well im a fabricator by trade so I guess im lucky in that dept :D
What hotbits setup?
As for the manifold, it is custom, 10 times better than the pacemaker I have, i found it on ebay with 20mins left! I couldnt belive anyone didnt buy it, I was looking onto making one myself, all materials came to about £300 and the mani was 150 so im very pleased with it, it wont fit a std exhaust setup but all I had to do was mod my cat replacement pipe with a flex section to suit and extend the o2 sensor as the sensor boss is way behind the engine now

Author:  dominator [ Sun Apr 07, 2013 12:06 pm ]
Post subject:  Re: itbs

Finaly finished the itb,
http://m.flickr.com/#/photos/11473969@N02/8616548511/
http://m.flickr.com/#/photos/11473969@N02/8617657682/

very pleased with how they turned out, the photos dont do them justice
I will be using socks on the v stacks and work out some sort of cold air feed when they are fitted
iv still got to finish the catch tank and vaccum manifold, fit the loom and some other mods iv been itching to get on so hopfully it will be done towards the end of the summer :D

Author:  locost7018 [ Mon Apr 08, 2013 9:39 pm ]
Post subject:  Re: itbs

Damn that looks good!!!!! Russ

Author:  nemoskull [ Sun Jun 09, 2013 7:56 pm ]
Post subject:  Re: itbs

on an off topic, i see u got dog gear set in ur flicker account.
those install yet? how much?

Author:  dominator [ Mon Jun 10, 2013 4:18 am ]
Post subject:  Re: itbs

Not in yet, one day :-), they were about £1.5k so not cheap but very good quality

Page 2 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/