TeamSwift
http://www.teamswift.net/

Transmission Index <-- look here first!
http://www.teamswift.net/viewtopic.php?f=9&t=17574
Page 1 of 1

Author:  Lihtan [ Thu Sep 15, 2005 12:17 am ]
Post subject:  Transmission Index <-- look here first!

Manual Transmission:

Factory Service Manual sections:
MK1 manual transaxle (includes T3 info):
http://www.teamswift.net/viewtopic.php?f=9&t=26290

MK2/MK3 manual transaxle:
http://www.teamswift.net/viewtopic.php?f=9&t=14856


Transmission Removal MK2/3 (includes bolt sizes & torque specs):
http://www.teamswift.net/viewtopic.php?p=82299#82299

Transmission Removal MK4/5 (includes pics)
http://www.teamswift.net/viewtopic.php?f=2&t=38129

Transmission Rebuild MK4/5
http://teamswift.net/viewtopic.php?f=9&t=50486

Transmission Installation:
http://www.teamswift.net/viewtopic.php?t=14697

DIY MK1 Transmission Repair (splitting the case):
http://www.teamswift.net/viewtopic.php?f=9&t=42589

Alternate Gear Oil Fill Location:
http://www.teamswift.net/viewtopic.php?t=11004

Short Shifter Info:
http://www.teamswift.net/viewtopic.php?t=2119
http://www.teamswift.net/viewtopic.php?t=3498
http://www.teamswift.net/viewtopic.php?t=3609
http://www.teamswift.net/viewtopic.php?t=3646
http://www.teamswift.net/viewtopic.php?t=11347

Shifter housing bushing delete:
http://www.teamswift.net/viewtopic.php?t=36184

Misc:
GTi driveshaft spline compatiblility
Transmission carnage (post pics of your dead tranny)


Gear Ratios:
All Swift gear ratios:
http://www.teamswift.net/viewtopic.php?f=9&t=31702

Finding ratio by code:
http://www.teamswift.net/viewtopic.php?f=9&t=18163


Limited Slip Differentials:
http://www.teamswift.net/viewtopic.php?f=9&t=2209


Clutch recommendations:
http://www.teamswift.net/viewtopic.php?f=9&t=2218


Automatic Transmission Info:
Automatic Transmission Troubleshooting Guide
http://www.teamswift.net/viewtopic.php?f=9&t=35213

Author:  Phil N Ed [ Fri Apr 02, 2010 1:03 pm ]
Post subject:  Re: Transmission Index <-- look here first!

Finding ratio without 'code':

Put the car in 5th, lift one front tire off the ground and rotate the crankshaft.

Rule #1:
For a 3.52 gear ratio: 4 crank revs = 3 tire revs. (74 ring/ 21 pinion teeth=3.5238095)
Rule #2:
For a 3.79 gear ratio: 3 crank revs = 2 tire revs. (72 ring/19 pinion teeth= 3.7894736)

Author:  jaguar,vettes&sprints [ Fri May 07, 2010 11:55 am ]
Post subject:  Re: Transmission Index <-- look here first!

Phil N Ed wrote:
Finding ratio without 'code':

Put the car in 5th, lift one front tire off the ground and rotate the crankshaft.

Rule #1:
For a 3.52 gear ratio: 4 crank revs = 3 tire revs. (74 ring/ 21 pinion teeth=3.5238095)
Rule #2:
For a 3.79 gear ratio: 3 crank revs = 2 tire revs. (72 ring/19 pinion teeth= 3.7894736)


.
Let See The Video.!

Author:  Phil N Ed [ Thu Apr 04, 2013 4:28 am ]
Post subject:  Re: Transmission Index <-- look here first!

I can't provide a video, but I can provide some pictures.
Here's the thread
http://geometroforum.com/single/?p=439157&t=4187023
and Wobblybob gives me credit in his first post (thanks for that).

Here you go:
4.39
Image

4.10
Image

3.79:
Image

3.52
Image

There are many threads outlining how to count teeth to determine the ratio and we should thank Lihtan and Dattman for their contributions.

Author:  top down@-40 [ Thu Apr 04, 2013 4:31 am ]
Post subject:  Re: Transmission Index <-- look here first!

:werd:

That's a great post.

Author:  t3 ragtop [ Thu Apr 04, 2013 6:04 pm ]
Post subject:  Re: Transmission Index <-- look here first!

that method makes a junkyard selection fast and easy. :wink:

thanks phil.

Author:  William Donovan [ Sat Jul 13, 2013 2:36 pm ]
Post subject:  Re: Transmission Index <-- look here first!

Finding the ratio made easy with those pictures. Well done @Phil N Ed. :)

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/